Sandstone Tiled Kitchen Floor Renovated in Maltby, Rotherham
Details below of a Sandstone Tiled floor I recently renovated in the Kitchen of a property in Maltby near Rotherham. Sandstone is a beautiful material however the rough nature of its surface needs to be sealed to prevent dirt from becoming trapped in the stone as once that happens no amount of mopping will remove the dirt.
Unfortunately, sealers wear down with use and in this case with it being the Kitchen it had seen a lot of wear. The stone had become darker, and the grout stained. The local area is well known for its coal mining history; however, my client didn’t want that reflected in their kitchen floor, so I was asked to pay them a visit to give the floor some TLC.
Cleaning a Sandstone Tiled Kitchen Floor
I started by removing the kickboards under the kitchen units and taping up the rest of the cabinets to protect them from splashing during cleaning. This was followed by the application of a medium strength dilution of Tile Doctor Pro-Clean using the usual method of mopping into the Sandstone tile and Grout and then leaving it to dwell and soak in for ten minutes. We do this as it gives the product time to start softening the dirt and grime making it much easier to remove.
After ten minutes I the floor was scrubbed using a rotary floor buffer fitted with a stiff brush attachment. A brush works much better than a pad on riven stone, the bristles get into all the ridges. Once I was happy with the results the dirty slurry was removed by a wet vacuum.
I was then able to inspect the floor and spot treat any stubborn stains by hand scrubbing them using the same treatment as before. Once I was satisfied the stone and grout was as clean as it could be the floor was given a thorough rinse to remove any trace of cleaning product and dirt. The floor was dried as much as possible with the wet vacuum and then assisted with fans.
It wasn’t a large area, so I planned to seal the floor later that afternoon.
Sealing Sandstone Kitchen Floor Tiles
After lunch I checked the Sandstone for moisture using a damp meter. My plan had worked, and I was able to start applying the first of what would be three coats of sealer. Having discussed sealer options previously with my client we had opted to go with Tile Doctor
Ultra-Seal which is a hard-wearing impregnating sealer that doesn’t leave a finish on the stone, so you get a very natural look.
Unfortunately, I didn’t get a photograph of the finished floor this time around however I took the picture below whilst working between two sections so you should be able to see the difference.
After completion the sandstone looked so much lighter and cleaner, much to the delight of my client. For aftercare cleaning I recommended they use Tile Doctor Neutral Tile Cleaner which is designed for the regular cleaning for sealed floors like this.
Professional Restoration of a Sandstone Tiled Floor in South Yorkshire
Sandstone Tiled Kitchen Floor Renovated in Maltby, Rotherham Read More »
