This ceramic tiled floor at a house in the old coal mining town of Barnsley was trapping dirt and bothering our client who was finding it impossible to keep clean. In fact, she got in touch with Tile Doctor to explain that however they cleaned the floor they just couldn’t get the tiles cleaned and looking bright.
Barnsley is my local town, so it wasn’t long before I was able to pop over to the property and survey the floor. When I got there I could see that the tiles, which had been laid throughout the Hallway and Kitchen, were Textured Ceramic which have the advantage of being anti-slip but the disadvantage of being a pain to keep clean. The rougher textured surface traps dirt easily and in this case no amount of mopping was going to clean them.
My customer explained they had tried numerous household cleaners but had been unable to get them really looking clean. I was confident the floor could be deep cleaned and brought back to life using Tile Doctor products and that the job should only take a day to complete. Happy with the quote, we worked out a mutually convenient date for me to return and clean the floor.
Deep Cleaning a Textured Ceramic Tiled Floor
I started by giving the floor a really long soak with a medium dilution of Tile Doctor Pro-Clean, the long dwell time allows the product to soak right into every bit of dirt that was clinging to the tiles and break it down. Pro-Clean is a concentrated, multi-purpose high-alkaline cleaner, stripper and degreaser which can be diluted in different ratios dependent on the situation. In this instance we diluted with 3 to 5 parts water to use as a very effective cleaner which is the recommended strength for removing inground dirt from areas that have been neglected or subjected to heavy use.
A black scrubbing pad was then fitted to a rotary floor buffer and run over the floor at slow speed to attack the dirt. It wasn’t long before the Pro-Clean turned dark with the loose dirt and the tiles started looking lighter in colour. The now thick brown slurry was removed using a wet vacuum and then the floor was given a rinse with water which was also extracted with the wet vacuum. The process was repeated over the entire floor and doubly so where the muck was proving stubborn to remove. After we had finished the floor looked lighter and much cleaner, the grout lines also looked cleaner too.
Our client was so relieved to have the floor looking like new again, it had been bothering her for quite some time. As you can see from the pictures the difference was quite apparent.
Before leaving we discussed the best way to keep the floor clean. Normally I would recommend a pH neutral tile cleaning product for cleaning tiles however in this case with no sealer present (ceramic tiles don’t usually accept a sealer) and given the textured surface I felt the continued use of Tile Doctor Pro-Clean would be their best option.
Professional Cleaning of Textured Ceramic Tiles in South Yorkshire
The owner of this house in Silkstone, which is a village situated in the foothills of the Pennines a few miles West of Barnsley, had inherited this Kitchen Slate floor from the previous owner of the house and in the years, they’d lived at the house they hadn’t done anything with the floor. Slate tiles are beautiful but like any natural stone you really need to maintain the sealer if you want them to stay that way, once the sealer wears off dirt can penetrate the pores of the stone resulting in a floor that always looks dull and dirty.
In this case of this Slate floor the sealer had worn off many years prior and a thick layer of grime had built up on top of what was once an amazing looking floor. Stone floors never come with a care guide and the process of degradation happens so slowly, so you can understand how this could happen over time.
Cleaning Dirty Slate Kitchen Tiles
Before starting I protected the wooden kitchen units from splashing using plastic sheeting. Next step was to soak the tiles in a strong dilution of Tile Doctor Remove and Go and Pro-Clean combined into a strong cleaning and stripping cocktail. The solution was left to dwell for ten minutes before being scrubbed in using a black scrubbing pad fitted to a rotary floor machine running at slow speed to break through the grime and the sealers and oils that the previous owner had used on the slate.
The pad is good at scrubbing the tiles but struggles to get into the grout so after the tiles were scrubbed I followed by running a stiff brush along the grout lines to give them a thorough clean.
The soiled cleaning solution was rinsed off the tiles with water and then extracted off the floor using a wet vacuum. With the floor clear it was inspected, and problem areas re-treated using the same process.
Once I was satisfied that the Slate and the Grout was clean and clear of old sealers I gave the whole floor a final rinse to remove any trace of cleaning products and then dried as much as possible using the wet vacuum. The floor was then left to dry out fully overnight.
Sealing Kitchen Slate Tiles
Returning to the property the next day, I ran some quick damp tests to check for any excess moisture that might have prevented me from sealing the floor. We will always do this as excess moisture can affect the sealer curing.
Our client had previously decided that they liked the look of our High Shine Sealer due to how it brings the stunning colours of the Slate out. High Shine Sealer is a specially formulated water-based blend of acrylic polymers that provides both a stain resistant surface seal and a durable high-sheen finish. Four coats of sealer were applied and when the customer arrived home later that day they were totally blown away by the floor and how amazing it looked.
Rejuvenating a Multicoloured Slate Tiled Kitchen Floor in Yorkshire