Yorkstone Tiles Archives - South Yorkshire Tile Doctor

Yorkstone Tiled Floor Renovation Hoylandswaine

Yorkstone Floor Covered in Thick Varnish Renovated in Hoylandswaine

1 Comment / Barnsley Tile Cleaning, Sandstone Tile Cleaning, Work by Category, Work by Location, Work History / Matthew Lovett

I was asked to visit a stunning old farmhouse in Hoylandswaine Barnsley to look at a Yorkstone kitchen floor which had several problems. The family who lived there were fed up with its black appearance and more importantly how dangerous it was due to a varnish covering that was applied which when wet became an ice-skating rink. The kids would regularly slip over on the very shiny floor, and it was becoming a real concern.

Yorkstone Flooring Before Varnish Removal Hoylandswaine

On my first visit to the property, I was shocked at how dark the Yorkstone floor had become in fact I thought initially it was Black Slate. Yorkstone is a variety of Sandstone that is quarried in Yorkshire and usually contains a range of pale colours visible, and at worst it can get dirty and turn grey.

After running a few cleaning tests, it was obvious the previous owners of the house had applied many coats of varnish to the floor, and it was going to be quite a job to strip it off.

Stripping Varnish off a Yorkstone Tiled Kitchen Floor

To ensure the best result I tried a range of different products and methods until I came up with a way to strip away the black dirty shiny varnish. Wood varnish isn’t something we often see applied to stone, so a combination of products including Tile Doctor Remove & Go and a heavy-duty polish stripper were applied to the floor and left to soak in.

Yorkstone Flooring During Varnish Removal Hoylandswaine

After leaving the floor for fifteen minutes to soften the varnish it was then scrubbed with a wire brush attachment fitted to a rotary buffer machine and run over each stone for a few minutes. This scraped the varnish off the surface of the stone and started to reveal the natural stone surface for the first time in years. Some areas needed treating two or three times to get rid of all the varnish.

Once I was satisfied all the varnish was gone the stone was given a deep clean using a medium strength dilution of Tile Doctor Pro-Clean. The product was applied this to the floor and left it to dwell for a few minutes before using the rotary floor machine again. This time the machine was fitted with a black scrubbing pad to clean the stone. The floor was cleared of all the slurry using a wet vacuum before being given a final rinse. The floor was left to dry off overnight.

Yorkstone Flooring During Varnish Removal Floor Drying Hoylandswaine

Sealing a Yorkstone Tiled Hallway Floor

Returning the following day, I reviewed the previous day’s work and could see there were a few bits of varnish stuck in the crevices of the stone and around the edges of the room. I managed to remove these using a wire brush fitted to an angle grinder.

Once the floor was cleaned of dust and flakes of varnish it was ready to for the final step of sealing. The client had chosen an impregnating sealer for this and wanted something that would improve the colours and keep the texture in the stone. Three coats of Tile Doctor Colour Grow were applied which as its name suggests brings the colours in the Sandstone out and offers protection from within the stone leaving a lovely finish.

Yorkstone Flooring After Varnish Removal Hoylandswaine

They loved the transformation that had occurred and let the following review.

”Matt provided a professional and efficient service from start to finish. He contacted me straight after I initially emailed and made arrangements to come and look at our floor the same day. After working out what he needed to do he got a quote to me that evening. Matt did a great job removing a thick layer of varnish on our stone floor and it now looks beautiful. I would highly recommend him. Thanks so much!”

Professional Restoration of a Yorkstone Tiled Hallway in South Yorkshire

Yorkstone Floor Covered in Thick Varnish Renovated in Hoylandswaine Read More »

Yorkstone Sandstone Floor Before and After Renovation Penistone

Yorkstone Floor Deep Cleaned and Sealed in Penistone

1 Comment / Barnsley Tile Cleaning, Sandstone Tile Cleaning, Work by Category, Work by Location, Work History / Matthew Lovett

The new owners of this converted old farmhouse in Penistone were struggling with its Yorkstone paved floor which continually looked dirty. They had tried to clean it themselves but whatever they tried seemed to have no effect. They found Tile Doctor on-line as their local representative I was asked to survey the floor and recommend a solution.

Dirty Yorkstone Floor Before Cleaning in Penistone

I paid a visit to the house and whilst there conducted a small test clean to show the owners what results could be achieved. I tested a few different products and methods to see what would work best and they were overjoyed with the difference. Happy and confident the stone floor could be renovated we agreed a price and booked at date in to do all 150 square meters.

Penistone is a small market town to the west of Barnsley nestled in the foothills of the Pennines, as it turns out there used to be a Sandstone quarry here so this Yorkstone floor could well have originated from that very quarry.

Cleaning a Yorkstone Tiled Kitchen Floor

Before doing any work, the area was prepped, woodwork was protected, and furniture was moved out of the way so there would be a clear space in which to work.

To get the floor clean I started by applying a strong dilution of Tile Doctor Pro-Clean to the floor which was left to dwell and soak into the pores of the stone for about ten minutes. Then a rotary floor machine was fitted with various diamond pads and brushes to scrub the floor. The Pro-clean and scrubbing action released what felt like decades of dirt from the Yorkshire floor and the true beauty of the sandstone started to show through. The resulting brown slurry was then removed with a wet vacuum before a final rinse was done. The floor was large, the work had to be done in small sections scrubbing and extracting until the whole area was clean and repeating the process where necessary.

Dirty Yorkstone Floor During Cleaning in Penistone

There were a few areas with missing and loose mortar between the joints of the stone, so these were raked out and sympathetically repaired.

By the end of the first day the floor was looking so much cleaner. The next step would be to seal the stone, but it would need to dry out before I could do that.

Sealing a Yorkstone Tiled Kitchen Floor

To allow plenty of time for drying I returned a few days later to seal the floor, first checking the stone was dry with the help of a damp meter. I know from experience that applying sealer to damp stone is a bad idea as it will affect the way the sealer cures and mar the overall finish.

The readings from the damp meter were fine so I proceeded to seal the Yorkstone flagstones with several coats of Tile Doctor Seal & Go. Natural stone like this is slightly porous so it’s important to prevent dirt from becoming ingrained in the stone by applying a sealer and make the floor easier to keep clean. I recommend Seal and Go for Sandstone floors as it adds a nice subtle shine and brings out the natural colours in the stone.

Dirty Yorkstone Floor After Cleaning Sealing in Penistone

The client was over the moon with the result, the floor looked superb and to ensure it stayed that way I took time to discuss aftercare cleaning. I make a point of doing this as I often find homeowners with stone floors don’t realise that most supermarket floor cleaning products are simply too strong for a sealed floor. Its always worth reading the label before buying a cleaning product as many are so strong, they can strip a protective sealer away with constant use leaving it vulnerable.

Dirty Yorkstone Floor After Cleaning in Penistone

For the regular cleaning of Sandstone type floors, we recommended the use of Tile Doctor Neutral Tile Cleaner. This product is pH neutral and so won’t compromise the newly applied sealer.

Professional Cleaning of a Yorkstone Tiled Hallway in South Yorkshire

Yorkstone Floor Deep Cleaned and Sealed in Penistone Read More »

Deep Cleaning and Sealing Yorkstone Flooring in Norton

Stained Yorkstone Floor Renovated After Leak in Norton Office

1 Comment / Aldwick le Street Tile Cleaning, Flagstone Tile Cleaning, Work History / Matthew Lovett

We were called in by a hygiene supplies company after one of their delivery drivers had delivered some hand wash to one of their clients in Norton, Sheffield and unfortunately during delivery one of the bottles had leaked all over this York Stone floor. It had caused some staining and removed some of the sealant, so the floor now required a complete deep clean and seal.

Office Yorkstone Floor Before Cleaning Norton Sheffield

The modern building in the Yorkshire Hills close to Sheffield is the headquarters of a Bar & Pub dispensing equipment suppliers and the York Stone runs right throughout the main reception area. As it is the first impression for visitors, it was important that the floor was cleaned and restored and obviously the company were keen to put right their drivers’ accident. After visiting the property to survey the floor we arranged to carry the work out over a weekend while the employees were out of the way and no clients would be visiting.

Cleaning a Yorkstone Office Floor in Sheffield

Firstly, we protected the skirting boards, carpets and adjoining rooms so any splashes from cleaning would not damage or stain anything. Then we set about applying Tile Doctor Pro Clean diluted 1:5 with water. This was left to soak into the stone for ten minutes to lift the grime, dirt and previous sealer out of the stone. Once it had been given time to soak in the solution was scrubbed into the stone with a 40kg weighted floor buffer fitted with a 17in black scrubbing pad running at medium speed. Immediately you could see a huge change in the appearance of the stone as the natural colours of the stone were revealed.

Office Yorkstone Floor During Cleaning Norton Sheffield

When one area had been scrubbed, we vacuumed up the resulting slurry and gave the floor a thorough rinse with fresh water. The rinsed water was also extracted with the wet vacuum before moving onto another area of floor. It took a full day to clean the whole floor and then we left it to dry off fully overnight.

Sealing a Yorkstone Office Floor in Sheffield

We returned the following morning, the floor was checked with the damp meter to ensure it was dry enough, it was within the correct parameters, so we were good to go ahead and apply the seal.

Office Yorkstone Floor After Cleaning Damp Test Norton Sheffield

The floor was given two coats of Tile Doctor Colour Grow; this is an impregnating sealer that seeps into the pores of the stone, intensifying the natural colours in the stone whilst providing the durable surface protection needed for such a high traffic area. Each coat is left to dry before applying the next.

Office Yorkstone Floor After Cleaning Norton Sheffield

Office Yorkstone Floor After Sealing Norton Sheffield

Once complete the floor looked much cleaner, the colours in the stone were much more evident and any evidence of the staining was gone. The new sealer is set to keep the floor protected from ingrained dirt for some time to come. The owners of the company were over the moon, and the driver was relieved too, as you can see from the pictures the change was dramatic. In fact, the feedback I got from the customer was.

“What a transformation!!!”

Office Yorkstone Floor After Sealing Water Test Norton Sheffield

Professional Restoration of Yorkstone Office Floor in South Yorkshire

Stained Yorkstone Floor Renovated After Leak in Norton Office Read More »